[Первоначальный текст]
 

Read More

Airmar MPN: D00342H

Airmar 10-Conductor In-Line Cable Splice - IP67

rating

€29.99

10-Conductor In-Line Cable Splice - IP67Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can be connected, but many CHIRP fishfinders and sounders us..

Stock Status12

Airmar MPN: 117WR-1

Airmar 117WR-1 Crows Foot Transducer Wrench

rating

€29.95

117WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. Th..

Stock Status2

Airmar MPN: 117WR-2

Airmar 117WR-2 Transducer Hull Nut Wrench

rating

€35.00

117WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings.You can use wrench 117WR-4 to brace the housing when using this wrench.For use with:B117 B150 B744V B744VL B765C SS555..

Stock Status2

Airmar MPN: 117WR-3

Airmar 117WR-3 Double Handle Transducer Wrench

rating

€67.50

117WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel...

Stock Status1

Airmar MPN: 117WR-4

Airmar 117WR-4 Transducer Housing Wrench

rating

€29.95

117WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2" bronze and stainless steel housings (P617V, B617V, SS617V..

Stock StatusOut Of Stock

Airmar MPN: 164WR-1

Airmar 164WR-1 Crows Foot Transducer Wrench

rating

€50.00

164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. Th..

Stock Status1

Airmar MPN: 164WR-2

Airmar 164WR-2 Transducer Hull Nut Wrench

rating

€68.00

164WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings.You can use wrench 164WR-4 to brace the housing when using this wrench.For use with:B164SS164SS264..

Stock Status1

Airmar MPN: 164WR-3

Airmar 164WR-3 Double Handle Transducer Wrench

rating

€84.00

164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel...

Stock Status3

Airmar MPN: 175WR-4

Airmar 175WR-4 Transducer Housing Wrench

rating

€35.00

175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut.For use with:B164..

Stock StatusOut Of Stock

Airmar MPN: 60WR-1

Airmar 60WR-1 Crows Foot Transducer Wrench

rating

€29.95

60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. The..

Stock Status4

Airmar MPN: 60WR-2

Airmar 60WR-2 Transducer Hull Nut Wrench

rating

€54.00

60WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench.For use with:B60SS60..

Stock StatusOut Of Stock

Airmar MPN: 60WR-3

Airmar 60WR-3 Double Handle Transducer Wrench

rating

€68.00

60WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. ..

Stock StatusOut Of Stock

Airmar MPN: 60WR-4

Airmar 60WR-4 Transducer Housing Wrench

rating

€33.95

60WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.Use wrench 60WR-2 or 60WR-3 for the hull nut.For use with:B60SS60..

Stock Status2

Airmar MPN: 75WR-1

Airmar 75WR-1 Crows Foot Transducer Wrench

rating

€30.95

75WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. The..

Stock Status2

Airmar MPN: 75WR-2

Airmar 75WR-2 Transducer Hull Nut Wrench

rating

€54.00

75WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on bronze and stainless steel housings. You can use wrench 75WR-4 to brace the housing when using this wrench.For use with:B75SS75..

Stock Status1

Airmar MPN: 75WR-3

Airmar 75WR-3 Double Handle Transducer Wrench

rating

€68.00

75WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. ..

Stock Status1

Airmar MPN: 75WR-4

Airmar 75WR-4 Transducer Housing Wrench

rating

€48.00

75WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. Use wrench 75WR-2 or 75WR-3 for the hull nut.For use with:B75SS7..

Stock Status1

Airmar MPN: 33-523-01

Airmar B258 / SS258 High Speed Fairing Block

rating

€150.00

B258, SS258 High Speed Fairing BlockAirmar High Speed Fairing block for B258, SS258 Style Transducer..

Stock StatusOut Of Stock

Airmar MPN: 33-351-01

Airmar B45 Standard Fairing Block

rating

€60.00

B45 Standard Low-Speed Fairing BlockAirmar's Standard Low-Speed Fairing Block for B45. Specifications:Dimensions: 4.25” x 2.37” x 1.87”..

Stock StatusOut Of Stock

Airmar MPN: 33-969-01

Airmar Chirp Junction Box f/Raymarine CP470 Type Connector

rating

€309.00

Chirp Junction Box for Raymarine CP470 Type ConnectorAirmar adapter box for single-band or dual-band CHIRP tranducers, with Raymarine 11-pin connector...

Stock StatusOut Of Stock

Showing 1 to 20 of 185 (10 Pages)